Question about Lexmark X Office Equipment & Supplies
...back in after 10-15 seconds. Check if "cover is open" message is still coming up on the display. If yes, the cover sensor may have gotten stuck when you opened the printer to change the cartridges. ...
Question about Lexmark X Office Equipment & Supplies
cover from the back of the printer. There are two phillips screws on the back panel of the pinter (one is located behind the paper jam hatch cover). Remove these screws (they secure the plastic hinges
not when trying to print it says that the cover is open but its not...We just changed the ink cartridge Open the cover, remove the ink cartridges, reinstert them, close the cover, and power it back on
cover from the back of the printer. There are two phillips screws on the back panel of the pinter (one is located behind the paper jam hatch cover). Remove these screws (they secure the plastic hinges
Question about Lexmark X Office Equipment & Supplies
...do anything now cover open shown in display unit will not work now you need to open cover and undo and remove the grey cover inside the printer as there is a switch at back of machine which has *** ...
cover from the back of the printer. There are two phillips screws on the back panel of the pinter (one is located behind the paper jam hatch cover). Remove these screws (they secure the plastic hinges
cover, you will see a little plastic lid on the right (where electric cables and switches are) This switch has come out its switch. With some fiddling around you should be able to put it back in place
...back after 30 seconds. 6. When the printer turns on, reinsert one cartridge first. 7. Close the printer cover and check for any errors. 8. If no error appears, reinsert the other cartridge. Close the ...
...cover back down and nothing happened on the display it says cover open i cant turn it off or do anything it seems to be stuck on that message if i press print on my computor a message is displayed ...
Question about Lexmark X Office Equipment & Supplies
cover from the back of the printer. There are two phillips screws on the back panel of the pinter (one is located behind the paper jam hatch cover). Remove these screws (they secure the plastic hinges
418 questions posted
Usually answered in minutes!
1,487 Questions
1,353 Questions
1,277 Questions
961 Questions
741 Questions