...code call service 6000:0098269, is anyone there can translate it? Thank you, [email protected] 6000 Broken fuser heater lamp wire The temperature does not reach 100°C/ 212°F after the fuser ...
...code means that the EDH top feeder tray (where you put the originals to be scanned) did not rise when it should have.1st make sure that there are no pens or paperclips in the end of the tray were it ...
Question about Canon Office Equipment & Supplies
code? Here is examples: E000004-0010 Insufficient temperature rise of the fixing unit at power E000004-0010 Insufficient temperature rise of the fixing unit at power Your going to just have to rebuild
Question about Canon Office Equipment & Supplies
...i get the codes for canon ir 2016 series. Hi, here you go: E000 0000 Fixing temperature abnormal rise E001 0000 Fixing unit temperature rise detection (by main thermistor) 0001 Fixing unit ...
Question about Canon Office Equipment & Supplies
Code E000004 Description Fixing temperature abnormal rise The temperature detected by the main thermistor does not rise to the specified value during startup control. Remedy 1.Go through the following
Question about Canon Office Equipment & Supplies
I have a problem with copier GP 225 it gives E003 how do I clear this code? fuser temp not rising at correct pace. could be thermistor,thermal switch or fuser lamp My Xerox machine show the error. How
CODE E9 The connected digital camera / video camera does not support Camera Direct Printing E14 The Ink cartridges whose destination are wrong E15 Ink cartridge is not installed E16 - Ink remaining is
Question about Office Equipment & Supplies
code is a fuser that failed to warmup. Broken fuser heater lamp wire The fuser temperature does not rise after the fuser heater lamp has been turned on. Tttt To resolve you will need a tech to replace
...Code: 6000 Contents: Broken fuser heater lamp wire 30 ppm model: The temperature does not rise 1×C after the fuser heater lamp has been turned on continuously 5 s. 35/45 ppm models: The ...
code E000003-0001on Canon ir C3220 this is problem with the thermistor . because the fixing temperature doesn't rise. maximum rise up to 70 degrees C. solution is change the thermistor with a new.
264 questions posted
Usually answered in minutes!
143 Questions
118 Questions
97 Questions
55 Questions
66 Questions