Zebra TLP 2824 Printer "label printing upside" Questions

...label maker is printing upside down and back to front You have turned on the "Mirror print" option. Here is a link to the manual. Go into the print functions and look up the Mirror Print option, that ...

...dust and bits left in. Turn it upside down and try again. Then try printing a 'blank label' with no labels in and see if the motor starts. There may be a sensor that prevents this - if so clean ...

...printing out the paper 'dummy run' sheets from my pack of labels fine but when the actual labels sheet goes through, the text is too high every time (when inserted either way round). I can't ...

...label printer Zebra 2844 prints labels upside down. I have tried "rotate 180 degree" in printing references and printing default and also tried to use "Always use driver settings" ...

The words on the label print out upside down. You can re-set the printer by pressing On/Off 20 times with batteries removed.

...printing from mainframe system the print is upside down. The top of print is on the bottom of the label. Do you have any suggestions. We are using the Generic print driver as we have used with all of ...

...label stock on an Intermec 3400 printer and they print great. We send to the printer parameters such as sensitivity. I was wondering if the darkness would need to be adjusted? Thanks, CJ You can ...

label maker upside down... place the cartridge so the WHITE 12mm ect sign is on top. pull the tape out a bit and pull it up so that it stick out where the tape would print out of. place the cover back

Unable to print labels Everything is fine other than I'm unable to print on labels Turn off the printer and open the printer back door. Use a spot light and give look inside properly. Make ...

...label print job - the cd labeler dialogboxes show up (u know -> "make sure cd is not put upside down etc!) - click ok -> next screen -> "r u sure you want to print" .... up to that screen, I see ...