Andis T-Outliner Hair Trimmer "put blades back together" Questions

...put the bigger of the two blades witht the size/number facing down, put the cutter on top. (with the side with the flat side of the teeth facing down) Then put the tongue guide inside the tension ...

...it would not cut so we took it apart and cant figure out how to put it back together. nothing helpful on line. did anyone have a link how to put all the pieces back together to create the blade? ...

put it back together The Blades on the outliner II were getting loose, and when I try to trim, it wouldn't cut strait. So I unscrewd them and tried to make it strait. When I put it back together it ...

put blades back I opened the head of my Igia AT352 to clean the blades. I've put it back together as I thought it should go, but now it won't cut anymore. Please could you help with how to put it back

...put together the blade Instruction to assemble a clipper blade.Above picture Socket Spring Tension Place Socket on Spring Tension like this Slide Socket back as shown in picture Turn Socket & ...

...PUT MY WAHL HAIR TRIMMER BLADES BACK TOGETHER well the smaller blade sits on plastic piece that is coming out of the clipper, having the inside of blade towards you. then larger blade ,the inside of ...

...put my shaver back together after I replaced the blades? I took my shaver apart to replace the heads and Blades and can't remember how it was together For Remington clippers, the smaller blade has a ...

...put the blades back together, but they jiggle, rather than performing correctly & may cut a little hair, but then almost fall apart. Thanks so much for any help you can give! Pat Federinko Hi A5 ...

put back together There is a small gun-metal colored bar at the very rear, just below the back of the blade when it is only the clipper. It pushes inward, in the direction of the blade. Push it firmly

...blades put that on the little blade, take the gold piece align with holes to the big blade and take the silver piece allign with holes and then put the screws back in. when you put it on the clipper ...