Jenn-Air SVE47100 Slide-In Electric Kitchen Range "power burner" Questions

...burner power light stays on but no heat Hi. I have a Whirlpool electric range (model rf363pxpt0) with standalone burners - the burner power indicator light stays lit whether the heat control knob is ...

than one burner will not light then the issue is with no power reaching the burners. Check wiring and switches controlling power - likelihood of more than one burner going bad at same time is fogitit.

...burner knob to off position the display goes blank. sounds like you lost power to your stove. if you can't reset the clock, it needs to be replaced. in otherwords, the power outtage shorted out the ...

...If power is there the burner is bad. If the control is not powering the burner then the control is bad. Rarely is it both but not a impossibility. 240 volts so a trained professional is preferred. ...

...power is on to a burner. Check for power between H1 and H2 with the switch on to that burner. If you have no reading then your switch is bad. <iframe width="640" height="360" ...

power is leaving switch and burner not working.its your burner.take a look at wiring diagram it will show you the power path, use volt meter[looking for out put at switch],[the limiter that you see in

...replacement stovetop burner STILL doesn't work, don't replace any more. Instead, check (or have checked) the circuit breaker for the range. It may get power from a second source to power the

burner. Where do I start? check your fuse / breaker box make sure you have power (sounds like you dropped a leg of power) make sure breakers/fuse is on/good flip it to off the to on if oven don't work

...burner element good. no power from stove to plug in module that has front and rear burner. front burner works. ok you have a fun one becuase the sockets could be bad you need to check for 220volts at ...