...limiter or infinite switch that needs to be replaced Hi yes your problem is with your infinate switch, you should replace it. If i can be of any further assistance please feel free to comment
Question about Jenn-Air Cooktops
Using front left burner back burner will turn on without turning knob for left back? SOUNDS LIKE THEY ARE HOOKED UP WRONG CHECK THE HARNESS SWITCH CONNECTIONS OR YOU MAY HAVE A BAD INFINITE SWITCH
...infinite switch for the large burner and also the receptacle for the large burner to plug into. Could it be the ceramic element the burners connect to at the back of the burner unit? The smaller ...
infinite switch which is already being used in the cook top for the largest burner or if not (cause I actually didn't look) for sure it is used in the JEC9536, just the wider model. This part is rated
...infinite switch has failed. They are easy to check and inexpensive. Here is a video that will walk you thru testing an infinite switch. It may be a different model but the testing will be the same. ...
...the front burner at the back it works. Your front burner is fine. Assuming you have an electric cooktop the problem is in the switch that controls that burner. The infinite control switch. Replace
Question about GE Cooktops
infinite switch on the left front burner, but problem still exists. Did I get a faulty switch or is there something else wrong? You could have a shorted burner, if it is not then you may have gotten a
Question about Thermador Cooktops
...infinite switch on the control panel controls the power to each surface element. If you have no heat at an element and the element and terminal block check ok, then you may have a defective infinite ...
Question about GE Cooktops
Infinite Switch is bad on two burners. This is a five burner stove. How do I find the part numbers for the infinite switch to replace them for this model stove. JP930B0C1 PartSelect Number PS1016429 ...
Question about Jenn-Air Cooktops
...infinite switch on the control panel controls the power to each surface element. If you have no heat at an element and the element and terminal block check ok, then you may have a defective infinite ...
356 questions posted
Usually answered in minutes!
118 Questions
87 Questions
55 Questions
38 Questions
38 Questions