Danby DKC646BLS Full Size / Pony Beer Keg Cooler "kegerator repair" Questions

I have a question re beverage aire kegerator. My fan isn't turning and the kegerator chills to 48 degrees, Is this repairable? It sounds like you have a bad fan motor. Call a service company out. They

...kegerator is in my garage where the temperature at this time of year is between 40 and 50 degrees. It can take a very long time to get a keg of beer down in temperature. The heat transfer from a keg ...

Kegerator no longer running cold my unit runs but the inside temp no longer is cool. I adjusted the back setting but no luck. What needs to be repaired You need a new start device if your compressor ...

...kegerator is properly plugged in and that the outlet has power. Check the thermostat: Ensure that the thermostat is set to the appropriate temperature. If it is set too high, the compressor will not ...

beverage air dd58 kegerator won't stay cold I have an older model bev air dd58 kegerator 2 tap stainless steel model that won't stay cold. I have had the freon charged twice in the past four months. ...

repair? i've poured a few hundred $ into this mini fridge to convert it to a kegerator (and i have a full keg on tap right now... which is getting warmer by the hour). is it the relays? and, if so, is

...Oct 25, 2009 - The back plate doesn't even get cool let alone cold. ..... Since I have kegerator parts from the Vissani I am just looking for the best frig to convert. Refrigerator ...

Kegerator I purchased at Sams Club a couple years ago. The temperature readout said LE at one point and now it will cool down when I first plug it in, but then it warms up to between 50-70 degrees and

my older superior kegerator all of a sudden quit cooling, however it still runs and the fan runs. any thoughts? Is it junk or fixable? It sounds like there is a freon loss or blockage. It is fixable. ...

...kegerator will not get cold. It seems to cool slightly but it wont get cold any longer. It does sounds like the compressor is working .. i hear it turn on and off as it did when it was working ...