Danby DKC646BLS Full Size / Pony Beer Keg Cooler "adjust temperature adjustment refrigerator" Questions

temperature adjust button to begin the test. When testing has been completed, do one of the following things: • Enter code 1 5 to completely reset the system. • Enter code 1 6 to exit diagnostic mode.

...adjust the temperature within your Electrolux refrigerator, EI23CS55GS1. To adjust the temperature you would use the control panel on the front of the freezer door. There should be a "-"or "+" near ...

temperature adjust button to begin the test. When testing has been completed, do one of the following things: ? Enter code 1 5 to completely reset the system. ? Enter code 1 6 to exit diagnostic mode.

...adjust temperature Hi, Please use your thermostat to adjust your temperature setting. Most refrigerator thermostat is come with actual temperature setting at thermostat dial but it just use range : ...

temperature adjust button to begin the test. When testing has been completed, do one of the following things: ? Enter code 1 5 to completely reset the system. ? Enter code 1 6 to exit diagnostic mode.

...temperature adjust button to begin the test. First, run the control and thermistor test: Control and Sensor System Self-Test (0 7) This test checks all five thermistors located throughout the unit. ...

...ADJUST REFRIGERATOR TEMPERATURE Refrigerator Adjusting Temperature Controls. At initial startup both fresh food and freezer controls should be set at the normal setting or mid point settings. ...

temperature difference. To adjust your temperatures: Adjust controls according to your Use and Care guide. Start out by making sure your settings are at the factory setting of MID / MID. Make only one

...display, you can use the control panel to adjust the temperature as well. Refer to your owner's manual for specific instructions on how to adjust the temperature settings using the control

...a "+" or "-" symbol to adjust the temperature. If any adjustments are made to the temperature, please allow 24 hours for the temperature to set properly. I hope this information has been helpful. ...