...the amp and the red meter lead on the B+ terminal of the amp, the voltage should remain at or above 11 volts. With the black lead again on the ground terminal of the amplifier and the red lead on the ...
...not included with amplifier speaker- and preamp-level inputs gold-plated terminals 8-5/16"W x 2-11/16"H x 11-1/2"D (10"D without front cover) 1-year ...
I NEED TWO 2200 MFD AT 100VOLT TO FIX MY AMP HELP FROM [email protected] There is a source here: http://www.plccenter.com/Cart part # LPW222M2AQ30VW Cost is $11 each.
...sure that the battery voltage, as measured at the amplifier?s +12 volt and ground terminals, is 11 volts or more (your alternator voltage is typically about 13.8 volts). So if you have 11 or less ...
i36.htmlOr the 870 Trigger Fix from Timney:http://www.brownells.com/.aspx/pid=32078/Product/REM-870-1100-11-87-TRIGGER-FIXThe 742 is an old gun. Not much made for it now
...a safety precaution amp will turn off whenever your cars alternator start putting out more than 9-11 I would suggest taking a voltmeter to your car battery to see what it is at while your idling as ...
touch the red lead alternately to the B+ and remote terminals of the amp. If the voltage is below ~11 volts, you need to check the wiring feeding whichever line is too low
touch the red lead alternately to the B+ and remote terminals of the amp. If the voltage is below ~11 volts, you need to check the wiring feeding whichever line is too low
Car Amp I have a Diesel Audio NSX-11 Duel Channel Amp.. and it has 2 lights on it, a red and a blue. Well one day it stopped working so I changed both fuses so they're brand new, but when I turn my ...
...on the ground terminal of the amplifier when checking the voltage. The voltage should remain above 11 volts. If it's below 11 volts on either the remote of B+ terminals, you need to trace down the ...
68 questions posted
Usually answered in minutes!
25 Questions
19 Questions
28 Questions
18 Questions