Power Acoustik TS1440-2 Car Audio Amplifier "hook amp" Questions

Ad

Question about MTX Car Audio & Video

1 Answer

thunder 5604 ok so i jsut got this amp and system form my brother...and i have it hooked up the same as i had my old on hooked up and now i know it turns on but wont put out sound like i have the ...

Ad

Question about Kicker Car Audio & Video

1 Answer

...a 2005 Dodge Durango you need to hook up the rem wire, that runs from head unit to amp its usaully a blue wire on the head unit and there should be a rem input near where the power leads are on the ...

Ad

Question about Jl Audio Car Audio & Video

1 Answer

...amp power light turns on when u hook up just the power and negative to amp then power light turns off after a min but when u hook up the remote and turn the stereo on the amp doesnt turn on You may ...

Question about Alpine Car Audio & Video

2 Answers

...amp? the subs r 4 ohms so it should work right? hook the positive to positive and negative to negative on both subs then run wire to the amp the amp will see a 2ohm load i have two type-rs hooked up ...

Question about Blaupunkt Car Audio & Video

2 Answers

...hook up a amp to a factroy stero If the amplifier has inputs for a high level signal, you unhook the wires going into the speaker and plug them into the amp, then hook the outputs up to the speakers. ...

Question about Kenwood Car Audio & Video

1 Answer

...hook up the speakers which are a 2ohm load please help me ok well it could be two thing wrong your amp dont have a good ground or your amp is a smar amp and your subs must have to be hooked up so the ...

Question about Kenwood Car Audio & Video

1 Answer

...with your subs. For 8 ohm setup hook up this way:Amp out+ to Sub1 +Sub1 - to Sub 2 +Amp out - to Sub2 - For 2 ohm setup hook up this way:Amp + to Sub1 +Sub1 + to Sub2 +Amp - to Sub1 -Sub1 - to Sub2

Question about Rockford Fosgate Car Audio & Video

1 Answer

i hooked up a punch 200m amp with a scosche 50 amp fuse to my battery and had the amp hooked up to my 12 in fosgate sub and then turned my system on nothing so i hooked the sub up it is working fine ...

...hook up sub to this amp thunder4160 have 2 - 3-ways already hooked up,were do i hook up the sub? Hi, you have two choices for hooking up a sub to the 4160 amp. You can either connect your sub to one ...

Question about Sony Car Audio & Video

1 Answer

...hook them up regular to each channel on your amp if your trying to brigde four ohm speakers to your amp it will keep going into protect or worst case scenario you will fry your speakers and you can ...

Not finding what you are looking for?
Power Acoustik TS1440-2 Car Audio Amplifier Logo

24 questions posted

Ask a Question

Usually answered in minutes!

Top Power Acoustik Car Audio & Video Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Power Acoustik Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...