Question about Ramsey Winch Vehicle Parts & Accessories
ground wire and all the hand control does is switch the supply to the solenoid for forward and reverse. From memory there's only 4 wires? Supply to hand control,1 wire to one sol, 1 wire to other sol,
96 silverado brake lights won't work when the headlights are on Check your grounds. Check grounding straps and ground wires in the back. If you have trailer lights added, check those wires and make ...
Blowing ignition fuses why does My 1996 4.3 Blazer keeps blowing the ignition fuse ever time its started and put in reverse? short circult.wiring short to the ground .u need to check for wiring
Question about 1A Auto Parts Vehicle Parts & Accessories
throttle cable melted throttle cable melted after installing new alternator. Normally that is due to a main battery cable,poor ground.If the ground is faulty,the throttle cable becomes the ground wire
Question about Chevrolet Vehicle Parts & Accessories
...Main starter lug (pos +) gets main battery cable & fusible link wire. Smaller S terminal get purple wire, that activates the starter solenoid. Ground is made by the starter bolted to the
...ground wire. There are many ground tabs throughout the harness...find them and remove the tag bolt (usually 10mm) and clean and re-affix. This will take care of most problems. Push comes to shove, ...
speedometer not working Check the wired from the tranny and spedo ground wire
Question about Westin Vehicle Parts & Accessories
...ground wire between the trailor and truck with a set of male female wire ends for extra grounding and put on a self tapping screw in frame or on a accesable bolt.Plug it all together and good to ...
Question about Koni Vehicle Parts & Accessories
...ground wire. First try moving connection on back of bulb, wiggle back and forth while light is on. If no change in brightness follow ground wire where it bolts down on radiator support. Take off ...
Question about KYB Vehicle Parts & Accessories
ground wire to ecm. drops to 0.9 meg ohm on engine turning over. need better ground need locate pin connect youd have a better result using a small light bulb (make sure its small) instead of injector
29 questions posted
Usually answered in minutes!
22 Questions
14 Questions