Acer AL2423W LCD Monitor "attach stand" Questions

...stand. The screws to attach the monitor got lost and I can't figure out what size I need to reattch the monitor to the stand. More likely to be metric M4 screws, 1/2" will more likely to be long ...

...attach a a flat plate wall bracket to it.but if you can't remove the stand, then put a clap speaker bracket on the wall & just clap the base of the monitor, as this type of bracket ...

...I want to use a standard wall mount. I can't figure out how to remove the stand that is currently attached. Thanks in advance. Looking at the manual ...

...gfjhguj I need to wall mount this also, i found away. Forget the base, that can stay on coz its attached to the arm. Concentrate on the arm. Where its attached to the monitor, pull the cover off, ...

...the monitor's two halves. The power supply and video board are underneath a metal cover - it is attached by two screws and the turn nuts that hold the VGA connector in

...back to stand-by. I think, that it seems to be defective backlight inverter? It odes the same when attached to another PC/ We just want to make usre it is not PC problem. I would suspect the caps ...

...soft surface then lift up the back cover to release the top side edge. Be real careful on the cable attached to the front bezel. See example here; http://s807.photobucket.com/albums/yy352/budm/ACER/ ...

...from the bottom of the stand ~ Pried of the front surface of the monitor (but the bottom still attached) I'm afraid that I will brake the front frame by prying it off more. There are 5 buttons

...clip noting that the ribbon cable is lightly glued down in one spot. Rotate the ribbon cable and attached circuit board up vertically so as to clear the metal panel holding down the bottom of the ...

Hoe do I remove teh attached stand on an ACER AL 1913? I have an Acer AL1913 an I want to put it on a wall mount. How do I remove the current base? Where the footpiece joins up with the screen, you'll