...Good luck and kind regards. yo can clean the password by removing the battery for 30- sec. this will clean the Bios/Cmos Remove the battery on motherboard and boot ur system will not ask about ...
Question about Dell OptiPlex Computers & Internet
...password Thanks The CMOS contains the current BIOS settings Turn off the computer and disconnect the power cable from the electrical outlet. Remove the computer cover. Locate the 2-pin password ...
...removing the CMOS battery. The CMOS battery is just a larger "watch battery" about the size of a nickel. Remove it for a few seconds, put it back in & power it back up. This will reset the BIOS ...
...how do i reset? plug out your power cable from the system after this plug out cmos battery only for five minute.then again plug in cmos battery and plug in power cable. your password is
Question about Dell OptiPlex Computers & Internet
cmos is password protected.... unable to disable password I have purchased a new harddrive....in cmos the secondary is off the only real thing you can do is to remove your cmos battery for about 5 ...
...password to boot up reset cmos will do the job remove power plug and off all power remove tower side cover look for a 3 pin or 2 pin cmos jumper and short circuit it. remove motherboard battery wait ...
Question about Dell OptiPlex Computers & Internet
...CMOS password reset jumper on the system board.Remove the jumper plug from pins 1 and 2.Place the jumper plug on pins 2 and 3 and wait approximately 5 seconds.Replace the jumper plug on pins 1 and
...cmos password Dell Optiplex 780, user forgot BIOS master password (which is necessary to change the boot order to run BartPE from CD and do an image backup). There is a jumper on the mainboard called ...
Question about Dell OptiPlex Computers & Internet
...reset BIOS by removing the CMOS battery.Wait several minutes then reinsert it and restart your computer. Some computer require a pin jump to reset the BIOS password. Check your owners manual. Good ...
...cmos password just locate the cmos jumper of your desktop on the motherboard, then remove the jumper pin and place it to Pin1&2 do not power on the cpu just insert the power cord w8 atleast 5secs ...
573 questions posted
Usually answered in minutes!
848 Questions
428 Questions
382 Questions
349 Questions
179 Questions