Dell Dimension 3000 PC Desktop "computers fan start stop" Questions

...start up my computer has a loud fan noise that won't stop. What is this and can I replace something to fix it? You can open up the computer and find out which fan is causing the noise. Then take this ...

...fan. if your computer shuts of, then the mother board has a fail safe when your cpu gets too hot. if that doesnt stop the clicking noise then its your hard drive, get a new one pretty soon or back up ...

fan will start going but then stop before the keyboard even lights up. This started only a few hours ago when I tried to turn it on: the fan started going, then stopped, then nothing happened. I tried

the dell dimentions 2350 the computer starts but then stops on its own Ensure that both the case fan and CPU fan are dust free and spinning. I think it could be overheating and then shutting itself ...

start to have heat problems, don't boot the computer until you have a larger CPU fan in place...and too you may be able to add an additional fan to the system for reassurance. the added noise is worth

the tower and the fan is spinning as it attempts to start. It sounds like the machine is experiencing hardware problems. You will either need to call Dell or take it into a local computer repair place

...fan drives hard and the screen will not come on at all, it could be a hardware issue, I have seen a few computers do this before in the past, if you unplug the power cord and leave it for a few ...

...start button is hit however no green light and yellow light stays on steady. test the supply power voltage at mother board connector and is 12v. all conections have been reseated and a new power ...

...fan areas for dust build up, open the side of the case and check for blockages, dust etc. Also unplug any accessories such as external hard drives, gaming devices, printers, etc. and try to start up ...

...start up just get yellow flashing lite As a temporary measure, taking the side panel off the dell 5150c stopped it from shutting down, so in my case it was clearly a heat problem, as suggested by ...