how to make booting not to push F1 Hi, do you mean, making the pc boot straight to desktop without asking you to push the F1 key at the BIOS startup stage. to that i advice you boot into the BIOS ...
dc 7100 small form factor workstation on power up red led flases up 6 times, will not boot you need to replace your hard drive !!!
restore factory settings TRY WITH.F9 .F10. OR F11. WHEN WINDOWS BOOT. ONE TAP ON THE TANGENT EVERY SECOND. DO RIGHT YOU GOT TO MENU TO CHOOSE FROM.
add paired ram, system will not boot could be a bad ram stick, or a stuck stick not all the way seeded in the board, check these things and if all else fails, try new ram, even new memory can be ...
erased partition I think i accidently erased the partition that helps boot up the computer. i tried installing XP home back on the computer but sits there telling me its formatting. should i just wait
Question about HP dc Computers & Internet
sony vaio beeps on startup then beeps once every three seconds on startup computer beeps then beeps every three seconds, no screen info,no monitor display Could be a problem with the RAM. You can do a
System will not re-boot with emergency recovery disks. Any suggestions? [email protected] your bios maybe set up not to boot from cd first. open your bios and look under the boot options ...
...small form factor CMDS and check sum invalid boot into safe mode and run CMD.exe and type in CHKDSK and run that program to fix any errors. If there still is a problem. Grab the CD in your computer ...
Although much noise pc and did not boot Hi This sounds like your cooling fan is not working correctly open the case and remove all dust from you CPU cooler and heatsink and this issue should then be ...
Desktop won't complete boot Compaq Presario starts booting but powers off/on at the Windows screen and starts the boot over again. It is in a continual loop. Tried booting in Safe Mode...same problem.
64 questions posted
Usually answered in minutes!
155 Questions
137 Questions
91 Questions
83 Questions
77 Questions