single beep from an AMI based BIOS means there has been a memory refresh timer error. The solution is often to replace the RAM in the computer. A long beep from AWARD is probably memory error. 1 short
Question about Compaq Computers & Internet
single continuous beep with but nothing else. When attempting to boot my Compaq Presario S4200NX, after pressing the Power button, the Compaq Splash screen is displayed followed by a single continuous
Question about Dell Computers & Internet
...single beep every 2 to 3 seconds continuous FoxConn G33M02 motherboard, POST begins but after a few seconds beep code begins: single beep every 2 to 3 seconds continuous. My old A+ manual says ...
...single Intel Xeon 5130 processor that has been having weird problems since we bought it used. The full profile for the machines specifications can be found here: ...
Question about Dell Computers & Internet
...single 3 sec beep on pwr up and nothing else. What is wrong? If the beep is a very high pitched tone, turn off the computer. Your CPU is overheating. The thermal paste may not be spread correctly on ...
...beep is also bad RAM. If you've replaced the ram then the only other explanation is the memory controller on the main board, looks like you'll have to replace that too. First check that the RAM is ...
...single beep during startup, it could indicate an error code for hardware failure detected during the POST phase of bootup. If you have recovery or Windows installation CD's, try pressing F12, go to ...
...beep codes identify it as bad memory. Try the old RAM. Good luck with this. Hi there! Make sure your memory is compatible with your motherboard. Make sure you are using a 133mhz memory. the T1150 ...
...single beep Press ALT+F Another beep Press ALT+B to reboot this should run IDE re-detection and all attached drives should be detected If one of you drives is not seen in windows, then recheck cable ...
20 questions posted
Usually answered in minutes!
2,767 Questions
2,074 Questions
1,822 Questions
1,740 Questions
1,432 Questions