Question about Brother MFC Office Equipment & Supplies
...drum. To reset the drum unit counter, follow the instructions below: Press Menu on the Control Panel. Press the Up or Down Arrow key to select Machine Info.. Press OK. Press the Up or Down Arrow key ...
Question about Brother MFC Office Equipment & Supplies
...reset the drum counter as instructed below. 5.Make sure that the machine is turned on. For MFC users: To confirm you are installing a new drum, press 1. For DCP users To confirm you are installing a ...
...drum unit".....YES | NO? press "1" to reset. after it says "accepted", close cover. Please rate me :) I left the cover open and pressed the option button. At that time I received the message, replace ...
Question about Brother MFC Office Equipment & Supplies
...reset the drum unit count. To do so: Press the Menu button, and then enter the number 84 to access the Reset Menu. Press the scroll keys until Drum is displayed and press OK. Drum unit will ...
Question about Brother MFC Office Equipment & Supplies
...drum. To reset the drum unit counter, follow the instructions below: Press Menu on the Control Panel. Press the Up or Down Arrow key to select Machine Info.. Press OK. Press the Up or Down Arrow key ...
Question about Brother MFC Office Equipment & Supplies
reset the change drum soon message after replacing drum. Have tried leaving cover open and pressing options, but it just tells me to close cover! This message would appear if the drum unit is near the
Question about Brother MFC Office Equipment & Supplies
...reset the drum counter? When you replace the drum unit with a new one, you need to reset the drum unit counter by completing the following steps: Turn the the machine?s power switch back on. Press ...
Question about Brother MFC Office Equipment & Supplies
...remove the toner cartridges from the drum. Prepare the new Drum Unit, including putting the cartridges in the new Drum. Then replace the Drum unit and reset the counter. I hope this helps. Cindy ...
...reset the drum error message for Brother MFC-9940CN: Turn the the machine's power switch back on. Press Menu > Machine Info. > Reset Menu. Press the Up or Down Arrow key to choose Drum. ...
...reset drum error message These machines need to have their drum units replaced every 12000 pages. If you have replaced it then it needs to have the machine reset. Normally the instructions are ...
104 questions posted
Usually answered in minutes!
1,135 Questions
1,012 Questions
743 Questions
623 Questions
406 Questions