Dyson DC14i Bagless Upright Cyclonic Vacuum "put cyclone assembly back together" Questions

...put the little white plastic piece and spring back together. HELP!!!!!! Thanks in advance! This is over a year too late, but perhaps this will help other people in your situation. Here is how the ...

...put them back together? I'm pretty sure our cleaning lady wasn't sure how to release the wand...and ended up removing the wand (just the metal "tube") from both the handle and then from the hose as ...

put it back together in the wrong order, now I can't get the canister off or open Hi there, it's Jack at Dyson. I'm sorry to hear you're having difficulty removing your DC07's cyclone assembly

...bottom when you're trying to line up that stick to put the handle portion back on the whole assembly. If it doesn't make it back in it's little home, it won't empty correctly. I hope this helps. ...

cyclone in the mail today after waiting in the back-ordered status for three months. I positioned a butter knife in between the rubber gasket on the bottom flap lid and the bottom rim of the clear bin

...put it back together. Could it be the switch or something causing loss of power. It's strange that the brush will rotate and pick up when the vacuum is pulled backwards but not forwards. I would ...

...put it back together yet because I haven't recieved the belt that I ordered online. I have by the way had to replace the switch assembly. Which is apparently a design flaw. I long for the days when ...

...put it back on the base, it doesn't sit tight on the base, so it doesn't have much suction, and is very noisy. Hi Becky, it's Jack at Dyson. From what you've described, it sounds like part of the ...

...put them together incorrectly so don't worry too much. You now need to remove two further screws which are recessed into the sides of the inside of the housing. Their positions are easy to find as ...

...put it all back together. But i cant remember exactly where this metal clip goes?? it is approx. 1/2" wide x 3/4" I do remember that it was wedged in somewhere against the brush belt maybe where its ...