...Turn off breakers or pull fuses before checking. It sounds like you only have half of the voltage you need. One of the wire connectors may be burnt or you may have a problem with the house wiring. ...
...turn the control knob on, I also read about 100V DC on the corresponding solenoid terminals of the simmer controller. I was surprised it was that high for a DC voltage, does anyone know if that is ...
Question about Hotpoint Kitchen Ranges
turn 2 1/2 turns for propane conversion. the broiler was 1 1/2 turns inward. you also had to flip a plastic cap under the nut on the regulator improper install on conversion or faulty kit converting a
...third of a pure blue pilot flame--that's the hottest part of the flame. The thermocouple itself may be burned out. It happens. It's a internal part of the gas valve so, no, you can't just change the ...
...third knob worth considering is available from AmericanStoveParts.com for $7 each. The front of the knob looks much like their OEM Replica Burner Knob 1104-B (but don't order #1104-B - it won't fit). ...
...burner is not getting gas and does not ignite. I have found the situation to be reversed (working vs non working) burners on a couple occassions. Could it be the thermocouple? The problem is almost ...
Question about Kitchen Ranges
Third attempt (an hour later). Turned heat to #3 setting nothing happened. Any suggestions? HI, You will need to change the burner switch. When the element shorted, it took out the switch also. If you
73 questions posted
Usually answered in minutes!
40 Questions
24 Questions
13 Questions
15 Questions