Thermador UCV36A 36" Universal Cook 'n' Vent Downdraft Kitchen Hood "range switch down" Questions

Smeg P580 range hood Smeg P580 Range hood will not switch off, fan goes from 1>4 but not 0 > 4 ? Hold the fan button down for a couple of seconds and it will turn off.

...40 watt appliance bulb on my range hood and the new one blew on first switch on. Hood is about 8 years old. one of the lights wires is grounding out tear it down to inspect or replace the whole ...

dacor goes up then right back down Does nothing but goes up and then down. All buttons seem to be working. HELP one of the snorkel switches is bad if that not the problem i would then change the board

...range hood with a fan speed issue. The lights work, and the fan works, but only on the highest speed setting. If I turn the fan on, then slide the fan speed switch down to the lowest setting, it just ...

...down. Push the button and it retracts normally, then pops right back up? check your bottom limit switch - i'm guessing its bad. the unit doesn't stop operating til it trips a (working) limit switch, ...

...down switch in downdraft vent for cooktop We have a downdraft cooktop vent that has a down (when not in use) and up (when in use) position. After my wife, put cleaning solution on the up/down switch, ...

...down control has a very small switch located under the button. The switch is part of the selector switch assembly that costs upwards of $100. However, the switch itself is available from Digi Key ...

...switch when it's time to go back down. The limit switches (one up one down) have small metal tabs that get disturbed by grease and increased weight of the grease. After cleaning, just bend the upper ...

...range downdraft up/down switch: J/N 625671 P/N 959-0402-00,01,02 C E140962 LN-121558-01. Any clue as to where I can get it? These guys are Nucking Futs!... $85 for this dinky **** switch?  ...

range fan that is 3 years old. Upon using it , it started to go up and then down without stopping until I unplugged it. I replugged it in and it continues to go up and down? What could be the problem.