Pyle Dryver PLAD213 Car Audio Amplifier "power wire" Questions

...power wire - one that is only active in service mode - first key position. You should draw a wire directly from the battery (don't forget to add a 40 amps fuse on the wire) to the amps. If you don't ...

...units main power wires. Note: A properly powered amp will produce a better sound quality then if it were under powered, so be sure to use the proper wire gauge as your amps power supply. Good luck ...

...power wire right off the battery. Amps surge and it is far easier to replace a $1 fuse than components inside your amp. Your ground is best served running to a bolt in the floorboard. Using the same ...

wire for power. If the Remote wire is powering up with the Head Unit (should be anywhere from 5-12 Volts), check your Power wire for +12 Volts, and check your Ground wire. If you are getting +12 Volts

...power to a wire other than the main red? which of the 4 input wires (red,black, smaller yellow, white) is the actual right, left audio inputs? Yes, keep in mind that the amps have a constant power ...

power wire from ur battery 2 ur amp and the same 4 ur ground wire You can run your amp.remote wire to your stereo which turns your amp on and off, but your power wire should be ran directly to battery

...POWER WIRE ON STEREO (ITS USUALLY BLUE WIRE OR OARNGE WIRE ON BACK OF STEREO)BE SURE YOU HAVE A GOOD CLEAN METAL TO METAL GROUND WIRE CONNECTED TO BODY CHASSIS///SOME NEW STEREOS HAVE DIFFERENT WIRES ...

...wire, it had power going through it. i checked the remote wire, it had power going through it also. but make sure the ground is tight as possible. that was my problem, the ground simply got ...

Their are 2 power wires,2 negative wires and 2 rem wires...how is this wired..im getting ready to get this put i How are these speakers hooked up...its got 2 power wires,2negitive wires and 2rem wires

...power wire at the battery. Be sure to fuse the power wire within 12” of the car's battery. This will protect the car's battery in case of a short circuit between the power amplifier and battery. THIS ...