ASUS P5LD2-VM Motherboard "sata drive" Questions

...sata drive as a floppy drive I had main sata plugged into sata 1. DVDRW sata was plugged into sata 3. All worked good. Then I plugged two more satas into sata ports 2 and 4; I wanted to clone a drive ...

...SATA 2 drive on a SATA (SATA 1?) controller, the hard drive must have a jumper position to restrict it to using SATA (SATA 150), and a jumper must be installed. Some drives have the jumper position ...

...sata drive but in standard setup in bios no sata drive is displaying. what can i do. is there any bios setup change. please inform me. thanking you my e-mail id is [email protected] I had the ...

...SATA drive ports on the board & one ATA IDE/PATA port. The 4 main SATA ports are numbered, 1 - 4. Your primary SATA drive must be connected to SATA port 1. Your second SATA drive must be connected to ...

...normal SATA cables to this motherboard? how ?Thanks you have to use with very small 180 to 90 degree cable for your sata connectivity Good Luck i want drive sata msi becose have 2 hard sata ...

...SATA drive to boot into Windows, the SATA connections must be set as first boot. The problem I found, I had an IDE CD/DVD drive and a SATA hard drive. I couldn't boot IDE to start the Windows Install ...

...DRIVEES IN MSI MS-6799 (MSI MS-6799 CAN NOT DETECT SATA DRIVES) Though sata drives are normally plug and go, sometimes you need the drivers installed first. Does the bios recognize the sata drive

SATA Drive on MSI K8T Neo upgrade hard drive. More detail. SATA Drive on MSI K8T Neo upgrade hard drive. I was not very specific in my first post. My manual describes the SATA drives as: SATA1 & ...

...drive thats sata NOT ide?? Unlike IDE drive cables, which allow you to connect at least 2 drives to the same cable, SATA cables only allow one connection from motherboard to drive per cable. You can ...

...sata drive as main boot up drive Run a sata drive as main boot up drive. Xp on ide cant see new sata drive to format or install Windows 7? XP installation does not have SATA drivers. You need to have ...