Procom ML300EBC Heater "pilot light yellow orange" Questions

...pilot light will then stay on but my fireplace flame is blue instead of orange/yellow. Any chance I can fix this problem without calling a service repair man? Thanks for your help. its an air shutter ...

...pilot light to light. Comes on Can't get pilot light to light. Comes on (eventually after numerous tries) but as soon as release control, it goes out. you can only test this with a volt meter capable ...

pilot light.This keeps you from having to light it everytime it goes on. The pilot flame is small, and usually mostly blue in color. If there is any yellow or orange color in the flame then the jet is

pilot burns in a Y-shape in order to feed both sides. Thanks a million, Scot The insert sounds like the cap covering the adjustment screw. Pin hole is for cap removal. Wondering why flame is so high?!

...pilot and all - in a minute or less. If the flames are all blue, it will stay on and cycle normally. I've noticed the orange flames and the heater shutting itself off more frequently when it's cold ...

...pilot light . When burner is on try tapping gently on the valve and main gas line to burners,when you do this the flame shoul burn more orange or yellow and then settle back down. Sometimes you can ...

...pilot light on it's an orange yellow flame and it goes out when I release the button. What is the problem The problem is the pilot assembly needs cleaning. This means cleaning the tip and the Oxygen ...

Pilot light seems to high The pilot light on my Ml300EHBC seems to run to high. It flickers and and has a very distinct pressure sound to it. FLickers mostly blue to a little orange and seems to be ...

...pilot light because pilot light would not stay on. After changing the pilot light the flame is orange and yellow and approximatley 3 or 4 inches long and also when I turn on the control valve I can ...

...pilot light that keeps going out.When i manually light it the furnace runs 12 to 14 hours, then no more pilot light and i must relight. Remove the burner and gas valve from the furnace and use ...