Roland VersaCAMM VP-540i "blade adjustment" Questions

...darkness but still light. Needs service yes, it need to be replaced the opc drum, opc drum cleaning blade and the developer, or just the opc drum and cleaning blade for the opc drum. Best turn out is ...

ticket, and what it does print is very faded. If the problem is on the right side , try adjusting the head pressure adjustment knob on the top right side. You can adjust with a flat blade screw driver

...blade release lever down several times.Make a copy and stop the machine when the paper reaches the transport section.If the lines appear replace the OPC drum.After replacing the drum perform the Drun ...

...and ITB then proceed else take the help of experienced person. Check the developer cleaning blade of the toner cart. also check the drum cleaning blade and ITB cleaning blade. If you can not ...

MAINTANANCE M2 MINOLTA BIZHUB 163 Need to have the drum and developer and cleaning blade replaced, then have that M2 counter reset. Resetting the counter with out replacing the drum developer and ...

...of reasons for a light copy 1. Drum - change the drum if it is run above 10 - 20000 copies 2. Blade - changing the blade simultaneously to improve the copy quality Thanking

...Otherwise it will advance to cut each time and leave the blank space from the head to the cutter

Estudio 350 Toshiba density adjustment It is better adjust in the developer unit by rotating 1thred both side of trim blade.

...as it will go. Try cleaning the optic's & look at the drum unit, you may need a new drum & ...