Dell Inspiron 1501 Notebook "pa 12" Questions

...PA 12. The store who sold me the new one only had a PA 10 which the tech said would work with my computer. I wanted to verify that it would be ok to use the PA 10 before I used it. Thank You yes the ...

pa-12 then you need the same one again The following three condition should be met for you to use an AC Adapter safely. 1) Output Voltage is within +/- 5% of your old charger's output. For example, if

PA-12 family charger and in the list is supposed to work with my 1501 Inspiron. Tried bios update.Microsoft ACPI is 6.0.6 already to. Check in BIOS and see whether its recognised there..If its not, it

...PA-12 for Dell. I think the problem is on the motherboard but I am haing a hard time locating schematics to be able to troublshoot the motherboard. Can you assist in pointing me whereto find this ...

...PA-10 & PA-12 have internal serial ROM chips that communicate with the PC via the tiny center pin in the powerr plug. If that pin gets bent or is not making proper contact, the laptop USUALLY ...

...pa 12 charger,today i've tested the charger,the green light is on, but no signs of charging.i pulled out the battery,putt it back, still no charging sign,no nothing...i've read some topics and i am ...

PA-12 $16.95 - AmeriMax Advance DELL Inspiron 1525 DC Power Laptop Adapter ... £25.23 - B2C Shopping UK DELL Inspiron 1525 Laptop AC Adapter power adapter £38.99 - Very Good Battery Dell Inspiron 1525

...off as you plugged it in, I think you just ran out of battery power. If in doubt get an electrical shop to test the adaptors output. I have several 19.5V, 3.34A LAPTOP AC ADAPTER FOR DELL PA-12 ...

...off You need to get a new power supply. ANY PA-12 or PA-10 will work. You can get one from ebay just make sure you get an ORIGINAL Dell one, NOT a knockoff. If you're in LA I can sell you one too

...PA-12 checking how to check my dell AC adapter PA-12 on multimeter ?? 'cause my Battery is not charging See what the output voltage the adapter says, it may be 19.5VDC @ 3.34A. Set the Multimeter to ...