Whirlpool LGB6300 Gas Dryer "igniter staying" Questions

...lga30aw burner won't stay ignited. will ignite from a cool down then run 4-7 minutes then cut off. igniter will burn red several attempts but no ignition of burner The gas valve coils are weak and ...

ignition but heat dont stay on ignition but dont stay on If it were to stay on their would be a fire. A gas dryer continually adds a little heat at a time. That is why the solenoid coils get weak with

...igniter cycles on for only ten to twelve seconds, not long enough to trigger gas flow. It will continue to cycle this way through the entire drying cycle, never again staying on long enough to start ...

...igniter glows for 3-5 seconds (while make a low "grinding" noise) but the burner never lights again. When the glow goes out there is a distinctive click on the 2+ try. But never on a cold start. I ...

...Gas Dryer will ignite fule for 10-20 seconds but wont stay on Check the following- Gas valve coils Igniter glows, then shuts off without igniting gas - the problem is probably with defective coils ...

...and here is a guide to most gas dryer problems that even a kid can see. starts fine, cycles off, igniter comes on, hear a click, and no flame.-coils. (can also be intermintent) igniter stays on,

When set on timed dry the flame for the heater box ignites and starters up stays on for 90 seconds and cycles off. Cycle on after 3 or 4 mins. Stays on 90 seconds. Than cycles off. Dryer continues to ...

gas dryer does not heat igniter glows red gas valve clicks but no flame Hello, Since the igniter glows i am wondering if within 1 minutes does it go off??or does the igniter just stay on?? If the ...

...corner of the dryer and provide the spark to ignite the gas.  If the coils are fine, then the igniter assembly needs replacing.  Best of luck. ...

i have a neptune mdg5500aww dryer, goes on, glowing igniter... but does not turn on the gas... what is wrong Hello, Their are 2 possible things wrong; 1) Does the igniter just stay on or does it glow ...