Whirlpool LGB6300 Gas Dryer "flame igniting" Questions

Ad

displays error code u100. what is the meaning? gas dryer colth is not dry coming wet check igniter, flame sensor and gas valve and coils? if no gas from valve you will have no flame ignition. hence no

Ad

my gas dryer starts fine than the flame goes out replace the coils. i promise you. and here is a guide to most gas dryer problems that even a kid can see. starts fine, cycles off, igniter comes on, ...

Ad

Igniter comes on and flame comes on. Igniter goes off and 40 seconds later, flame goes out. About 40 seconds later, igniter comes back on and then flame comes back on. About 40 seconds later, flame ...

Igniter comes on and flame comes on. Igniter goes off and 40 seconds later, flame goes out. About 40 seconds later, igniter comes back on and then flame comes back on. About 40 seconds later, flame ...

Question about Dryers

1 Answer

...Gas to rest of house is operable. Hello, Thier are 2 possible things causing it not to heat. 1) The flame sensor is bad..if the igniter glows BUT does not go off it will be the FLAME SERSOR that is ...

gas dryer does not heat igniter glows red gas valve clicks but no flame Hello, Since the igniter glows i am wondering if within 1 minutes does it go off??or does the igniter just stay on?? If the ...

GE DRYER DDG7288- Not getting hot. No flame. Is there normally pilot flame? How is ignition reached? There is not a pilot flame. These dryers use a glow bar igniter. As they heat up, there resistance ...

glow ignitor works, but no flame ignites. ohmed out gas valve coil with wires disconnected = OL is it my coil? gas dryer runs. glow ignitor functions normally. flame ignites when i first turn on, but ...

My Maytag Neptune MDG6700A will run, but the ignitor will never glow and flame never turns on. I cannot locate the Thermal Fuse to change it. if voltage to ignitor during cycle bad ignitor if no ...

...the gas ignited. After a reasonable burn time to raise the temperature, there was a click and the flame died. This continued to happen for 30 minutes or so. As the towels began to reach a damp-ish ...

Not finding what you are looking for?
Whirlpool LGB6300 Gas Dryer Logo

211 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Dryers Experts

Virgil Watts

Level 2 Expert

267 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whirlpool Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...