Whirlpool LGB6300 Gas Dryer "flame goes" Questions

Ad

...flame goes out. About 40 seconds later, igniter comes back on and then flame comes back on. About 40 seconds later, flame goes out again. It sounds like the sensor that determines that a flame is ...

Ad

...goes off and 40 seconds later, flame goes out. About 40 seconds later, igniter comes back on and then flame comes back on. About 40 seconds later, flame goes out again. It should be doing that

Ad

Question about Maytag Dryers

1 Answer

flame goes out when dryer starts, I get a nice hot flame but it goes out after about 20 seconds. If this unit has a pilot flame, the breather around the pilot flame has become dusty. The best way to ...

...flame goes out after about 30 seconds. I have The flame goes out after about 30 seconds. I have replaced both coils and once again the flame goes out after about thirty seconds. I can see the heating ...

...flame goes out The dryer flame ignites -- it takes about 40 seconds -- then after the dryer flame starts, it goes out in about 1 minute....what could be wrong? The 'radiant sensor/ needs to be ...

Question about Whirlpool Dryers

1 Answer

...flame goes on but shuts off shortly the problem is as described above and the kit is needed. There is a flame safety assembly on the can above the burner. If the airflow is poor. the flame tip may ...

...flame goes on. One minute later the flame and pilot go out. The one minute after that pilot goes back on and flame starts again. This is all occuring while drum is spinning. should have electronic ...

...flame goes on and then off lgr4634eq3 model runs but does not heat. The ignitor goes on and the flame starts but goes out after about a minute. We changed the thermal fuse and the ignitor but it ...

Question about Maytag Dryers

1 Answer

...goes back on, but no burner. what up If the flame sensor is not returning a good signal, the gas valve is shut off as a safety measure. I surmise that in this situation, the igniter is programmed to ...

to run and the flame goes on but same problem as above. The Model is a DG410. usually when this happens it is one of the heat thermotats going bad, when the thermostat goes bad it will shut down flame

Not finding what you are looking for?
Whirlpool LGB6300 Gas Dryer Logo

211 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Dryers Experts

Virgil Watts

Level 2 Expert

267 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whirlpool Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...