...control panel to lock the control panel. Listen for a double beep and observe the "Control Lock" status light is lit when the control lock is in effect. Press and hold for 3 seconds the "Control ...
control panel the light that says control locked is on and the washer does not work - is there a way to reset it? Press the Pause/Cancel button twice then press and hold the End of Cycle Signal button
...function Press and hold for 3 seconds the "Control Lock/Unlock" button on the control panel to unlock the control panel. The "Control Lock" status light is goes out when the control panel is
...2012 gas dryer control panel the control panel has no power I have the same dryer. My control panel went dead today too. Light in drum works just fine. Nothing working at all on the control
...control panel not operating Hello, My Kenmore Dryer light comes on in the inside when the door is open, but the control panel does not operate (will not light for me to activiate dryer). There is a ...
...control panel inadvertently locked. If you are referring to a Whirlpool Duet, Kenmore Elite, or Maytag Epic series washer or dryer, the control lock is a built-in safety feature that enables the ...
...signal volume control button should be on right side of the control panel push and hold for 3 to 4 seconds and that will unlock the control panel if indeed the panel is locked Hope this
...control panel but I have power going into the unit. I have power at the thermal limiter but no lights on control panel Check the connection go to panel or you a have break on the membrane of the ...
...control panel to lock the control panel. Listen for a double beep and observe the "Control Lock" status light is lit when the control lock is in effect. Press and hold for 3 seconds the "Control ...
260 questions posted
Usually answered in minutes!
1,123 Questions
940 Questions
790 Questions
219 Questions