Whirlpool LGR5644J Gas Dryer "check glow bar ohm meter" Questions

Ad

Question about Roper Dryers

1 Answer

...glow bar probably needs replacing, check it with an ohm meter, usually you can see if the glow bar is broken because it is ceramic and is usually broken. Be carefull when replacing the new one not to ...

Ad

Question about Kenmore Dryers

1 Answer

...check all of these components with your multi-meter set to the lowest Ohms. With the dryer unplugged: 1.) Radiant Sensor. This radiant sensor for a gas-heated dryer senses the air temperature in the ...

Ad

Question about Dryers

2 Answers

...glow bar with no success. Hi If your dryer is not heating, then check if the power cord is plugged into the wall. It may be loose or disconnected. Inspect the fuses and circuit breakers they may have ...

...glow bar come on an go back out without ignite. Gas then the problem would be your gas coil If it is not getting hot check the igniter or the flame sensor units for continuity. Check also the high ...

Question about Whirlpool Dryers

1 Answer

glow bar starts to light but nothing else happens, you eed to check the heat sensor. It is connected to the flame baffle at the end of the gas valve. It will have 2 wires on it. One white and one blue

...Glow bar ignitor does not light. Flame doesn't come on. Changed Internal Bias Operating Thermostat still doesn't ignite. What could be other cause for flame not igniting.. Thanks Pete Gas Dryer no ...

Question about KitchenAid Dryers

1 Answer

...glow bar igniter, thermal fuse ( not all models ), coils on the gas valve, gas valve, thermostats,motor heat switch, timer, selector switch, sensor. A page for checking gas dryers is here. Meter ...

Question about Kenmore Dryers

1 Answer

...glow bar igniter, thermal fuse ( not all models ), coils on the gas valve, gas valve, thermostats, motor heat switch, timer, selector switch, sensor. A page for checking gas dryers is here. Please do ...

Question about Kenmore Dryers

1 Answer

...glow bar is not getting hot. Often a dryer heating element burns out, but doesn't trip the circuit breaker or blow a fuse. The heating element is simply a long coil of special wire. You can check it ...

Question about Kenmore Dryers

1 Answer

...heating: - glow bar igniter, thermal fuse ( not all models ), coils on the gas valve, gas valve, thermostats,motor heat switch, timer, selector switch, sensor. A page for checking gas dryers

Not finding what you are looking for?
Whirlpool LGR5644J Gas Dryer Logo

12 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Dryers Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Ned Halaweh
Ned Halaweh

Level 2 Expert

240 Answers

Are you a Whirlpool Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...