Whirlpool LER4634J Electric Dryer "replacing plug" Questions

...plug? Buy a 3 wire cord and install it on the dryer. Hang onto the 4 wire one in case you move again. ya want to replace the cord.. the outlet is only wired for 3 wires so replacing the outlet their ...

is their any way to ground a three prong house plug-in from a two wire most appliances, tv's, etc. have 3 prong plugs. I have only a 2 prong plug-ins in my house. Is their an easy & safe ...

REPLACING THE PLUG IM TRYING TO REPLACE THE PLUG ON MY DRYER BUT I DONT KNOW WHERE THE WIRES GO.. The plugs wires on your dryer are on the back of the unit under a metal plate. If you live in the U/K,

i need to replace the 4 cord dryer plug that is currently on my dryer with a 3 cord plug because the plug that is in place has 3 receptacles. the replacement 3 prong plug that i bought is not color ...

I have a Kenmore Elite electric dryer model # 11063932102 that will not start. It was in storage for five months and it had some superficial mice issues on the body, which cleaned up nicely, but now ...

Hotpoint TL51 cable and plug get very hot This indicates a badly fitted plug, loose wire in the plug, or a bad socket, check for discolouration of the socket and plug. Replace if any sign of ...

prong on dryer plug gets hot and burns plastic on plug I smelled burning plastic while dryer was running. I pulled the plug and found one of the terminals was burnt and the plastic around the terminal

Will not lite. Glow plug comes on but gas does Will not lite. Glow plug comes on but gas does not flow check current draw on glow plug if less than 4 amps replace you need more than 4 amps to open bi ...

asko stackable dryer/Bosch stackable washer compatability I have an older Asko stackable dryer with three prong plug in on the back for Asko washer--am looking to replace washer with a Bosch axxis ...

electrical cord prong fried and melted whole plug. replaced plug and plug in. dryer will not start. Hi, It may also have fried the circuit breaker...check that you have 220v out of the breaker panel ...