...hot with steam, could it be the thermostat....Thank You, John the stat is mounted to the bottom of the tub it will read closed if good if it reads open replace it my repairman contacted whirlpool ...
Question about Dishwashers
wash cycle.I have observed that the heating element light stays on for approxametly 25 minutes whereas it used to stay on for a few minutes.It is getting up to temperature slowly.I have confirmed that
...WASH I HAVE TO CANCEL iT WAS FOR ABOUT 3 HRS IN A LIGHT CYCLE Check to see if the water is getting hot during this time, if not then the heater is probably not working, could be bad heater, bad door ...
Question about Dishwashers
...wash ( I have used the same detergent in my previous machine and there was no problem). Please help ! There is a rather delicate mechanism which controls that soap door. Often this is the first part ...
AM14 Display will stay in Rinse Cycle unit washes fine but when it goes into rinse it will stay there until I turn the machine off and back on see this probably causes:Water-heating cyclethe heating ...
...only good solution I suggest is to add the detergent after the first hot wash (just open the main door and drop it in!)...of course the best is to change this door locker with a new one...good
...Thereby asking for more water to enter the tank from your supply which might not be hot enough at times. If the wash spray is not straight up or down then a lot of water will just go down the
Question about Bosch Dishwashers
...hot water going though cycle. Control knob manually advanced past 5 o'clock (wash), since it will stay there and not advance. Is it most likely the thermostat, heater assembly or something else? ...
hotpoint dishwasher swd6o i have a hotpoint dishwasher, aquarius swd60,, and the water is not getting hot,, and not washing properly, i have all ready ask for help, but spelt it all wrong. when it ...
135 questions posted
Usually answered in minutes!
915 Questions
493 Questions
219 Questions
129 Questions
99 Questions