...water past the heater efficiently or due to lack of water to heat. Please make sure that heater is not open circuited and is heating the water efficiently. You'll have to check the heater using a ...
heater checks good then press in sequence normal wash, heat dry, normal wash, heat dry, normal wash, heat dry three times within 6 sec and all the lights will come on then hit cancel. What that did is
heater checks good then press in sequence normal wash, heat dry, normal wash, heat dry, normal wash, heat dry three times within 6 sec and all the lights will come on then hit cancel. What that did is
...water run hot before you start the dishwasher. The heater itself will ohm out at 10 to 35 ohms. Hope the information helps out.. I was haveing a problem with my Whirlpool dishwasher. The clean light ...
...water drainage. This dishwasher has a heater fault detection circuit. If the heater is not working, the control will detect the lack of increase in water temperature. The dishwasher will stop and the ...
Water in Machine-Lights Blinking Hi Thanks for using FixYa. That means the control sensed that the heater in the D/W did not operate 3 times in a row. So the unit locks out. First remove the kick ...
1,262 questions posted
Usually answered in minutes!
493 Questions
219 Questions
129 Questions
99 Questions
102 Questions