Whirlpool GU2400XTP Built-in Dishwasher "knob hard turn" Questions

...knob that you turn or the button that you push. They are not hard to replace but the parts are reletavely expensive and the labor always get you. My Kenmore did this and the part was half of what I ...

hard to diagnose without tools. The first thing to do is check the breaker for it. See if it has tripped. If it has not then turn the dial to a setting and close the door and put your ear right on the

...hard to be specific. But on a middle grade or less that has a mechanical timer behind the main knob, that mechanism is often the failed part. If the dish washer is has a separate power on/off button, ...

knob is turned. The short cycle will engage (sound like it is working) but the soap is left in the reservoir and about 2 inches of water is left in the bottom. Thank you for your help. Sounds like the

...hard to be specific without knowing the model number of your Hotpoint dishwasher and approximately how many years old it is... If your dishwasher has a mechanical timer knob that you turn to get the ...

...knob, it makes the same "clicking" noise it used to, but the machine does not come on. Any ideas? is there a reset button somewhere? Reset is by disconnecting the power to it. If it is hard ...

...knob is there anything that can be done Look very closely at the wash motor shaft extension on your dishwasher. You?ll need to disassemble from the spray arm downward to get to it. A plastic shaft ...

...KNOB ON WASHER TO DRAIN. MAKE SURE YOU HEAR WATER DRAINING IN SINK AND PROBLEM SOLVED. IF THE PUMP MOTOR IS NOT TURNING AT ALL , BUT YOU CAN HEAR IT ENGAGE, THEN TURN WASHER OFF, TAKE FRONT BOTTOM ...

...knob the opposite direction than what the arm rotates. there might be a blockage in the shaft which can be seen when the spray arm is removed. the other blockage might be in the inlet to the pump ...

...on sounds as though its working, but then stops and wont move on to the next stage. If the control knob is moved by hand the machine sounds as though its workin again then the same thing happens,