...self leveling rear legs, just lean the machine forward and set down slowly. the rear legs are now level. if you dont have self leveling rear legs, the legs screw in, so just screw them in or out as ...
...washing machine. The legs/bolts come out but we can't get them to lock in the position we want. Hello, Thank You for using FixYa. I will be helping you today.The front legs should have a lock nut ...
...washing machine model 92529110. My wife has been noticing that the tub leans toward the front causing the water to hit the back edge of the tub instead of running straight into the tub. She can push ...
...machine has been balanced/leveled several times. Any ideas? check the back leveling legs, they are self adjusting, but if the rust they will just stick in one position I have the very same problem on ...
...self leveling legs in the rear. Usually they set themselves if you tilt the machine forward and then let it fall down onto the rear legs. A little oil would also help. I have a washer with self ...
washing machine unbalance and now not spinning leaving water in the washer Two types of balance involved with washers. First is the machine. Most new machines are self leveling with the front legs. If
...washing machine is so heavy, when it's not level, it can vibrate strongly during the spin cycle. If your washing machine is not perfectly level--with all four legs touching the floor--it can bang and ...
Question about Frigidaire Washing Machines
affinity washing machine not level/unbalance. Harm machine? It's definitely not healthy for it. adjust the legs at the front and use a level on top while leveling. The rear feet self level
...check to see if this is the problem? Disconnect ac/cord,hoses and drain pipe, lay machine down on front side. Inspect the self-leveling bar ***'y and spray liberally with WD-40 if rusty and/or
146 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
1,373 Questions