Whirlpool LSB6200KQ Top Load Washer "lid switch" Questions

Ad

...lid switch failure. Heres what the service manual for your washer says about the failure. Flashes if the lid is NOT opened after the cycle was completed. The electronic control board must detect that ...

Ad

Question about Whirlpool Washing Machines

3 Answers

lid switch The most common cause of the symptoms you describe is a lid switch malfunction. The lid switch is usually mounted under the washer top casing, on the right hand side on most top load models

Ad

...Lid switch problem My Kenmore elite 100.24942301 has a problem with the lid switch. We close the lid to start the washing process, but after filling with water the machine does not start. It thinks ...

...lid safety switch is bad. Replace the switch. If this is a unit with a hidden lid switch, left rear, you may only need tighten your lid hinge screws. Replace the lid switch assembly. By hitting the ...

Question about Whirlpool Washing Machines

1 Answer

...lid switch is not functioning properly. Raise the top part of the washer to gain access to the lid switch. Disconnect the machine from the power source. Gently pry the emblem from the front of the ...

Question about Kenmore Washing Machines

1 Answer

...lid switch malfunction. If your model number is correct, the lid switch for your washer is located under the right hand side of the washer casing along the wash tub rim. The switch is activated by a ...

Question about Roper Washing Machines

1 Answer

...lid switch too, just to be sure it is making contact.From what you are describing it sounds like the problem with your washer could either be the lid switch or no cold water. However there are a ...

Question about Washing Machines

1 Answer

lid switch problem My kenmore elite washer model 100.24942301 is having an issue with the lid switch. We close the lid and the machine doesn't start. IF we lift the lid and drop it, it starts washing.

Question about Kenmore Washing Machines

1 Answer

...lid switch. The lid switch will be located on the machine top where the lid closes. It may be a plunger on the lid that activates the switch or a white plastic flat piece where the lids sets. Either ...

...lid switch cuts off power to the washer and will cause the washer to stop and not to start at all when it fails or when the lid switch strike breaks. Check the lid switch strike located on the middle ...

Not finding what you are looking for?
Whirlpool LSB6200KQ Top Load Washer Logo

146 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...