Whirlpool LSQ8543J "not work" Questions

not work, when is plugged in display does not work, there is only flashing light from the drum. it stop work last night when fuse on main board switch off. mens IQ700 Washing Machine Not Working. Tell

...work just wont start check the door switch and check if the power comes to the panel. If not the switch is faulty. If the switch works but the panel does not start even after the push switch is ...

...NOT WORK AFTER THAT. IT DOES MAKE SMALL NOISE LIKE MOTOR BUT DOES NOT WORK. Maytag LAT3600A Top Load Washer1 Points MY whirlpool WASHER MACHINE FILLS WITH WATER BUT DOES NOT WORK AFTER THAT. IT DOES ...

...not work I have a GE washer/about 2-3years old rinse and spin cycles will not work But wash and soak cycles will not work at all Just cycled thru the switch several times and all of a sudden today it ...

...work if not look at creaters glide if still does not work cheak water pipes and coneshoins and if still does not work ask someone at the store and if STILL does not work return to store and buy a new ...

...not damaged. The belt is very important for the spin to work good. Match it up with your old belt. The old belt will be slightly longer because of being stretched over a period of time. Get your unit ...

...have a bad timer. They can work perfectly in one setting, and not work at all on an other. They can sometimes get a "flat spot" in one area that will stop them from moving or working. Good Luck!!! ...

...not push and start and all cycles seem to work when working it manually, this is in the switch timer electronic diode is not working properly. Sometimes a code will not come up, because cycles are ...

...not work. Trying to do a Spin Rinse then wait the 5 secs after start and hold Tube Clean does not work. Ugghhhh! Only suggestion I have is to try these old reset solution that work on some older lg ...

...not working as the motor seems to work with wash cycle. Try and use another program and see if the spin works, is not try to see if the spon works manually choosing to start on the spin cycle. If not ...