REady keeps flashing on ultrium 960 Hi Rajeev The Ready light flashing usually just shows tape motion and is nothing to worry about. If there is no tape in the drive and you are still having problems ...
DLT VS160 hi Media is ejecting automatically. ready and media red led is blinking red LED blinkin suggests the drive is reporting some sort of internal error, if you can see no obvuios problem ...
Once the drive reboots then make sure that the A error doesn't return. If the drive comes back as a ready state then try to run your backup & see if you get the same error again
disconnect the library, power up the library. Check the operator panel of the library for an online ready status
...inside. If you contact www.tape-drive-repair.com they usually have this sort of thing on the shelf ready to go, or could give you a price for them to repair and warranty the whole
...is rewound. The status light turns solid green when the rewind is complete and the tape drive is ready. Although it is from an older LTO version, it must work on the newer versions too. I also did ...
wait for the library to finish initialization and verify from the control panel it is in an online/ready state, power up the computer
...power the unit on, it performs its power-on self-test for about 30 seconds. When the tape drive is ready, the top LED turns off. If you attempt to insert a cartridge into the tape drive during the ...
...reboot.....it should sense the unit is there then auto install drivers for it and you SHOULD be ready to go! but post back your
Question about Ideal Hardware Computers & Internet
...you pin no on your mobile number via sms. Just enter that pin number in required place and you are ready to check and pay your bill online. In case registration fails, kindly get in touch with ...
18 questions posted
Usually answered in minutes!
790 Questions
782 Questions
456 Questions
445 Questions
428 Questions