Acer AL2671W 26 in. LCD Television "direct tv remote won change" Questions

DIRECT TV REMOTE WON"T WORK WITH MY RCA 32in LCD Tried all codes and can't get the RC64 Direct TV remote to work with my RCA 32in LCD TV. The remote can change the channels when on DTV mode only, but ...

...direct line-of-sight to the TV. Wish that the bluetooth part worked for my satellite equipement too! Programmable remotes will operate this TV, but depending on how old they are, they may not be able ...

...TV won't quit flipping. The only button that works is the power button. I can hold the channel button down and flipping stops for about 2 minutes and then it starts flipping again. I cleaned ...

...remote to bring up the small box in the corner. Press the PIP input button until you select the TV input and you should be ready to go. You may need to perform a channel scan with your TV tuner to ...

TV using the main power buton (the one at the front) or the remote control. I replaced all the capacitors in the main board (20 100uF/16V and 8 470uF/16V), but the TV still remains in stand-by.* Is it

TV, both by pressing the button directly and by using the remote, and the red stand by light stays the same. I unplug the tv and it goes out... that's the only change I can make to it, it&

TV, you will won. It is a time taking procedure.  Check it.  Here the procedure is.Code SearchIf after trying “Direct Code Entry” your device does not respond, or if your brand is not listed