Whirlpool LSQ8243H "removing gear box washer" Questions

...gear box by removing it. It's ok. Lid switch is fine also. I then bypassed lid switch and set to spin cycle. clutch housing turns, but basket does not. I noticed a little bit of oil splattered on ...

...gear box. this gear box could have a mechanical problem on the spin cycle. it usually turns the reverse rotation if it wants to spin. check the pulley of the gear box, rotate it in one direction for ...

gear and lift the motor into position to fit the coupling back together. 12. Reinstall the retaining clips on the motor and the screws on the clips. 13. Reinstall the pump and its retaining clips. 14.

...gear box, this is fairly simple to do. First disconnect the washer from power sourceand empty the remaining water, I use a shop vac for that. I usually prop the front of the washer up on something ...

...gear box and on the inside of the gear box. check out the repair price and the shaft seal availability as it may be cheaper to get a new machine. Remove agitator first and see it there is any items ...

Maytag Neptune fron load washers spin cycle did not remove water from clothes if the water pump is working then your gear box is slipping

...gear box. Look at the gear box diagrams on the Sears site. We had a major noise problem with our top loader and traced it to worn agitate cams. Pulling and replacing parts in the transmission is a ...

...spin cycle. Can anyone please help me? remove the agitator and inspect the main shaft on the gear box.and check the belt underneath.if the shaft is bend you will need a new gearbox. hope this

...removed the water it just sits there and the drum dosent move it could be a belt but in that case you would still hear the motor running if not then the gear box is locked and will need to be ...

...gear box then it can be within the box that a drive is struck. So open the box and reset. Please also look for any foreign articles that have come out of the clothes which has got struck into the ...