Whirlpool LSQ8243H "lid open" Questions

Ad

switch contacts should be closed. ? With the lid open, lid switch contacts should be open. ? If the lid switch has failed, replace it. ? If the lid switch is good, replace the electronic control board

Ad

Question about Whirlpool Washing Machines

1 Answer

...open the lid,get a screw driver and stick it in the hole on top,that's the lid switch set the timer to spin,or close the lid then open it an inch and close it and open it if you don't hear a ...

Ad

Question about Maytag Washing Machines

1 Answer

...help!!! the lid switch is buggered the lid can be open while its filling but when it goes to start washing the lid needs to be shut so the lid switch isnt working so the machine thinks the lids

Question about Kenmore Washing Machines

1 Answer

...lid open. ➔ User presses START after 2 consecutive machine cycles without opening lid. ➔ The machine/motor control cannot detect the lid switch opening and closing properly. ...

Question about Ariston Technologies Washing Machines

1 Answer

...spinning. Spinning and Rinsing require a safety switch to be enabled by the closing of the washers lid. Check around your lid and washer lid opening to find the mechanism that is used to activate

Question about Kenmore Washing Machines

2 Answers

...open the lid a lttle and close it down a few times,if you don't hear a clicking sound when it closes you have a bad lid switch,or open the lid and stick a screw driver in the hole where the piece on ...

Question about Maytag Washing Machines

1 Answer

...open look at the lid switch mechanism as you open and close the lid. Make sure the slide is making contact with the lid switch. If your model has a fuse on the lid switch verify the fuse is not

Question about Kenmore Washing Machines

1 Answer

...lid open. ➔ User presses START after 2 consecutive machine cycles without opening lid. ➔ The machine/motor control cannot detect the lid switch opening and closing properly. ...

Question about Fisher Washing Machines

1 Answer

...open the lid during the cycle the START/PAUSE button must be pressed, the machine will come to a halt, and the lid locked LED will extinguish. If the lid is left open, the machine will be unable to ...

...lid will not fully open I've never used it My lid will not fully open I've never used it Look for an obstruction at the hinges, the junction of the lid to the main body which will not allow the ...

Not finding what you are looking for?
Washing Machines Logo

21 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...