Question about Whirlpool Washing Machines
...broke part number 285753A and it's around 20 bucks.you need to remove the two phillips screws that are in the rear corners of the top console,don't no why they put them in the rear,then flip up the ...
...rear one on each side,remove them and flip the console up.with a screw driver pop the two metal clips,put the screw driver in the hole and on top of the clip and push back to the wall,the clip will ...
...broke, the washer will not agitate in the wash cycle either. Here are insttructiions on how to change the coupler. Removing the cabinet. UNPLUG the washer. There are two screws holding the control ...
Question about Kenmore Washing Machines
...broke. If there is no agitation r spin, the coupler is most common. Here is how to change the coupler. Removing the cabinet. UNPLUG the washer. There are two screws holding the control panel to the ...
...broke them lose and greased tighten the spring and it should work good. time to time might want to grease it. for the other person if you machine sounds like it is winding to go in to outer space, it ...
...broke on one side of the tub. I ordered a new one and replaced both shocks. The belt is still slipping off. Rear Tub Bearing Replacement This advice is for replacing the rear wash tub shell of most ...
...rear one on each side,remove them and flip the console up.with a screw driver pop the two metal clips,put the screw driver in the hole and on top of the clip and push back to the wall,the clip will ...
505 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
1,373 Questions