Question about Whirlpool Washing Machines
... Unplug the washer for 1 minute from the electrical outlet. 2. Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering ...
...the spin cycle, the clothes are still soaking wet. How do I empty the lint trap? Remove the front lower panel (3 screws on lower lip - lay on floor to see). Panel come right off. there is a round ...
How do you clean out the filter on a whirlpool duet sport washer? Prop up the lower front edge of the washer or cushion the rear top edge with cloth and lean the washer against the wall for easy ...
lower agitator spins, upper portion does not This washer has an upper and lower agitator. The lower one still has plenty of power and movement, but the upper one no longer engages. It seems as if it ...
Question about Maytag Washing Machines
Washing machine will not spin dry but washes properly Observing from front lower panel removed: Washes properly with upper and lower plastic "clutch" engaged. When put into spin mode the upper and ...
bosch2401 water leaking from a lower part towards bosch2401 water leaking from a lower part towards the front lower corner which I can see when I TOOK THE PANEL OFF THE BACK SIDE OF THE MACHINE. I ...
...on how do I fix it I'm not sure about your specific model, but in a Kenmore HE3 front loader, the lower front panel is removed, and it reveals the screw-on drain cover, which can clog up with
Lower loop thread falls out The lower loop thread on my Kenmore over lock 2/3/4D machine falls out of the needle after 4-5 inches of stitching. It is threaded properly and on a lower tension number. I
...noise as spin speed increases. Upon inspection of the machine there is evidence that the front lower edge of the lower stabalising block has been coming in contact with the front of the machine. ...
49 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
1,373 Questions