...hot and cold water inlet hoses reversed? Is the water heater a distance from the washer? Are you washing many loads in a short amount of time?Is the washer new or just recently installed? Are the hot ...
Only cold water When I run my Duet washer on cold cycle is uses hot water... why? water lines are reversed, this is about the only problem that can cause this
hot water comes in cold/cold setting These machines are designed to have the cold water around 70-75 degrees. If your cold water is colder than that it will automatically mix in hot during the wash ...
HOT water to a cold cycle. I know it is supposed to raise the water temp. to help the detergent work better, but I don't want strait hot water on my dark or delicate clothes. It really malfunctions at
...cold rinse it rinses with HOT water, I assume it is the control or some one put the wiring to the wrong terminals on the water temp controller. What do you think it may be? Try reversing the water ...
Question about Whirlpool duet Washing Machines
...HOT or COLD - if not, label them BEFORE removing.) 6. Connect water supply lines making sure they are not crossed. If you have the original manufacturer's hoses, they will be marked RED for hot and ...
...to one valve and whites to the other,def. same color to both terminals, and should be obvious by length of wire which goes to which, if not run before closing top to be sure hot/cold not ...
Question about Whirlpool duet Washing Machines
hot & cold water hose connections on a whirlpool duet washer? Hi and welcome to FixYa, 1. Drain and Flush your HOT water heater. This bugger will keep supplying sediment for weeks! 2. There can be
Question about Whirlpool duet Washing Machines
...hot & cold fill hoses going to the washer. 2) remove the three screws along the back of the top panel and then slide the top panel back slightly and pull up. The panel should lift away. 3) in the ...
Question about Whirlpool duet Washing Machines
...hot and cold are marked. Make sure that the hoses aren't reversed. Sounds like they are. Nothing else would explain such an occurrence, unless the lines were reversed inside the machine, which would ...
348 questions posted
Usually answered in minutes!
9,125 Questions
187 Questions
64 Questions
34 Questions