Whirlpool Gold Duet GHW9400P 3.8 Cu. Ft. Front-Loading Washer "ht unlock control" Questions

...unlock control panel? Hi Thanks for using FixYa. To resolve this and unlock the controls you?ll need to press and hold the END OF CYCLE button for 10-15 seconds. Please do rate the solution if the ...

...ht washer.the control lock is on ,how do i cancel this? I have forgotten .THankyou Janet To unlock the control lock press and hold the cancel button down for 5 sec or till you here a beep. Good ...

The control lock button is lit How to unlock un plug the machine for a while and see if it clears

ht until now. I had a power outage and when I tried to do wash after the power was restored I had this DL F error message. This is the info from the error code for your washer DL/F Door Unlock Error A

...unlock control status light never indicated the locked position, yet my washer now works. NOTE: Select and hold END OF CYCLE SIGNAL button for 3 seconds to toggle between lock and unlock. My whilpool ...

...HT I get 3 short beeps when I press the 'Power' button. Power does not come on (it's plugged in and there's power to the recepticle). The only other button that works is the 'Controls Lock/Unlock' ...

...HT and the control is locked. how do i unlock thanks Mine is doing this all the time, I finally got tired of pulling the washer out to unplug it so I plugged the washer into an extension cord that's ...

...HT. Moved it to clean behind it and now control panel won't work. It has power because when I plug it in the light that says contro panel locked is on. Nothing else works and the screen is blank. Any ...

...unlock it Hold down the end of cycle button 3 secs or until the control lock status light turns off Hi Hold the cancel button down for more than three seconds. Also press any of the buttons on the ...

...HT HE Hi Thanks for using FixYa. To resolve this issue and to unlock the controls you?ll need to press and hold the END OF CYCLE button for 10-15 seconds. Please do rate the solution if the issue is ...