...timer has a knob that screws off and then you remove the dial indication escutcheon and the mounting screws can then be removed to swap out that timer. This is the connection to the lid switch. You ...
...dial set to agitate, try inserting a something PLASTIC like a stirrer or ballpoint pen cap into the slot where the lid cam engages the switch. It may be possible to manually turn the switch on with ...
Question about Whirlpool Washing Machines
...dial identifing the wash sequence would at least would at least turn, but to avail. I get 120V coming in but find no power going to the lid switch, and I don't see any fuses to replace. Any ...
...timer went out on my washer so I replaced that today and its still having the same problem. It will start to run like normal and then about 3 minutes in the cycle it will stop. I can change the dial ...
...timer control dial slowly 360 degrees- If the washer starts spinning, then we know the motor and drive belt are fine but that there is something wrong with either the timer control dial or the ...
Question about General Electric Washing Machines
...timer (the dial doesn't seem to be "catching" right when setting the machine), but we would like some additional insight before ordering the part. He has checked the belt, which is tight. Any help ...
...dial to the last 2 minutes of the permanent press cycle, it will in fact fill the tub and agitate for only 2 minutes so I twirl it around again for another 2 minute cycle two more times so I can get ...
Question about Washing Machines
...dial shows 'FO5'. No spin, or lite spin try these: bare in mind that many times there is no spin it can be due to a clogged water pump so check it for debris and or broken propeller. Other items to ...
...dial. Does it need a new timer switch? First, see the Sears Parts site for your washer: http://www.searspartsdirect.com/partsdirect/getModel!retrieve.pd?pop=true&modelNumber=110.20924990 Initial ...
dial to the rinse cycle. If it rinses and spins, the problem is in the switch which is basically held on by a couple of screws. Of the washer still will not rinse or spin, the problem is likely in the
316 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
1,373 Questions
