...washer. On that setting the water fills the tub with only "hot" water however the warm/warm water temp works and cold/cold water temp works. Most of my loads I want to use a warm/cold setting but ...
Question about Kenmore Washing Machines
washer will fill with hot water and when the switch is set to warm it will fill with warm water. I checked both water outlets at the wall and they both work. Also when the switch was set to warm I can
...washer is on warm warm, hot warm anything but cold. Otherwise I get NO water. It will spin. But I can only get hot water. Not even warm water. One of two things, easy one first, the cold water inlet ...
...warm/cold while filling? Yes, this is normal. All newer washer have auto temp control fills. This is to meet energy saving requirements. The less hot water used the more energy saved. Most hot ...
...washer no hot or warm water entering washer Clean inlet filters for water supply hoses coming into back of washer. There two small screens on the inlet fittings, "back of washer" that must be removed ...
run into washer. warm is fine, cold water won't run into washer. warm is fine, just no cold Hello. If the cold water will not run into your washer you will need to replace the water valve on your unit
...warm and cold, hot and cold the washer makes squicky noise and very little water come out even though both hot and cold water are open. the only time that does not make the squicky noise is the ...
...warm sounds like your washer has an auto temp. control if so the washer mesures the temp of the water and put in the manufacture set temp for that setting this board could be bad alowing only cold ...
washer will fill with hot water and when the switch is set to warm it will fill with warm water. I checked both water outlets at the wall and they both work. Also when the switch was set to warm I can
1,616 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
429 Questions