Whirlpool Ultimate Care II LSQ9564J Top Load Washer "hold works" Questions

Ad

Question about Whirlpool Washing Machines

1 Answer

...onHe3 Control locked light is on. We unplugged it but the light is still on. It says to press and hold for 3 seconds but that did not work either. Now what do we do to get the wash to work? try ...

Ad

Question about Whirlpool Washing Machines

1 Answer

opened whirlpool front load and now can not get it turned back on! the signal button hold 4 sec didnt work. any suggestions? diagnostic mode is any one modifer button -hold 5 secs release 5 secs, hold

Ad

Question about Indesit Washing Machines

1 Answer

...works!!!!! 1. press and hold the reset button for about 5 seconds. 2. press and hold - start/reset button on/off switch and the left function button ALL AT THE SAME TIME keep holding until D OFF ...

Question about Whirlpool Washing Machines

1 Answer

The "Hold to Start" button The "Hold to Start" button is not working. It was finicky before; you had to push it just so to get it to work. now it doesn't. I'm afraid someone pushed it too ...

...works. This washing machine is 3 years old and was working fine. This happened once before, under warranty. The service agent powered on while holding down other buttons to reset the electronics and ...

...on or OFF Spinsense does not work. Trying to do a Spin Rinse then wait the 5 secs after start and hold Tube Clean does not work. Ugghhhh! Only suggestion I have is to try these old reset solution ...

Question about Whirlpool Washing Machines

1 Answer

how do you reset washer press and hold the control lock button-count to 10-if this doesn't work press and hold the pause/cancel-if this doesn't work unplug it for overnight and plug back in-cheers ...

Question about Whirlpool Washing Machines

11 Answers

...I 'd have to pay for a costly service visit and repair, but my husband just fixed it! yay! just hold in the "end of cycle" signal button for about 5 seconds, and voila! control locked, unlocked! ...

Question about Whirlpool Washing Machines

1 Answer

to fix the control lock you hold down the control to fix the control lock you hold down the control lock for 30 seconds. I get this from another link. Thanks for your help. ( it doesn't work to hold ...

...Model # DRSR495GG8WW works only with start switch hold IN The dryer got then dry out motor works and it drys ( IF ) you hold the start switch in. You will need to replace the door

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9564J Top Load Washer Logo

1,616 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8221 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1482 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...