Whirlpool Ultimate Care II LSQ9564J Top Load Washer "agitator grinds move hand" Questions

...agitator moves very little and makes a great racket. Help! Could be the belt or the bearing or both... You need to remove the belt and test if agitator moves easy by hand, then it means bearing is ...

...agitator does not move at all on spin cycle but when the door is closed, a clickling sound is heard in the controls console. Also, how do you get the water to drain if the spin cycle doesn't work? it ...

...agitator wants tp move but has a broken belt or gear-a kind of grinding sound. Is it worth paying all the costs of in home repair(no warranty) or should I just buy a new one? What is the make?If it's ...

...hand ? and or the agitator to ,when machine is stopped.?,,,i took the belt off and niether turn by hand.1-15-09 The tub is supposed to be locked untill the brake is released. When the machine is in ...

...agitator can be moved freely by hand, you probably have a stripped bell, which is the small plastic dome that the agitator is attached to. Maybe hear a grinding noise in agitation from under the ...

...agitator starts, i hear a grinding metal on metal noise. When I move the tub with my hand to the right side, nois stops. Is this question pertaining to the Performa PAV2200 as listed above?

...agitator/tub by hand. If it is jammed you should investigate why. Possibly caused by bearing failure or something wound around spindle. Take care and do not attempt to investigate the problem without ...

...agitator. I have unplugged and waited and did the lid open close 20 times deal. didn't work. I was thinkin about burnin some incense and sacrificing a chicken but I thought I would ask you first. ...

agitator is not moving and if you can move it both directions with your hand, then the dogs are worn out. This is an easy fix all you need to do is find the brand and model of your WM (washing Machine

...move the drum by hand, but it does not turn. I'm not sure if the drum on this machine normally turns by hand or not. I want to make sure that this problem can be fixed by replacing the MCU or ...