Whirlpool Calypso GVW9959K Top Load Washer "hose pressure" Questions

Ad

Question about Electrolux Washing Machines

1 Answer

...pressure hose. Pressure hose might have a hole in it. Pressure hose is a small hose about 5/16" inch diameter. Pressure switch controls the water. The air from air dome inside the tub pushes the ...

Ad

Question about Hotpoint Washing Machines

1 Answer

...pressure chamber hose leading to the pressure switch. Remove the small plastic hose and check for blockage here and in the black hose where the small hose is fastened too. If it still overfills, then ...

Ad

...pressure hose, and pressure hose to pressure sensor. See TEST #8 (Drain Pump) on page 19. Is pressure hose pinched, kinked, plugged, or leaking air?Is pressure hose pinched, kinked, plugged, or ...

Question about Indesit Washing Machines

1 Answer

...pressure hose or the pressure hose bottle may be blocked not allowing the pressure switch to activate. there may even be a small hole in the pressure switch hose. Check the thin pressure hose that ...

...hose (pressure switch side and tub side) and reconnect them making sure to push hose ends securely onto connections. This is done because the hose sometimes stretches at the connection points and you ...

Question about Kenmore Washing Machines

1 Answer

...pressure hose has air leaks or clogs causing the pressure switch not to trip. Disconnect power then remove the screws attaching the top panel to the rear of the machine then slide the panel rearwards ...

...hose (pressure switch side and tub side) and reconnect them making sure to push hose ends securely onto connections. This is done because the hose sometimes stretches at the connection points and you ...

Question about Amana Washing Machines

1 Answer

...hose enables the pressure switch to sense the pressure differential from the wash tub basin as the washer fills. When the tub fills to the appropriate level, the pressure from the hose shuts off the ...

Question about Indesit Washing Machines

1 Answer

...empty. this could be either a faulty pressure switch, blocked pressure hose (pull off small hose and blow down to clear any debris) or a blocked sump hose ( big black hose at the bottom of

Question about Hotpoint Washing Machines

1 Answer

...pressure hose is plugged with debris from the base of the tub up to the pressure switch or the pressure switch  in the upper side area or behind the control panel is bad,follow this small hose ...

Not finding what you are looking for?
Whirlpool Calypso GVW9959K Top Load Washer Logo

1,725 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...